链条齿式联轴器怎么拆卸

ROD鼓形齿式联轴器是Rokee独立开发的核心技术传动产品之一并且在国家建立和报备了企业技术标准，结合了日本，德国等先进国家的鼓型齿联轴器标准技术，优化了很多细部尺寸链，采用了大压力角齿形设计，轴孔采用短轴设计，缩小了长径比，结构更加紧凑，转速性能优异。相近型号的螺栓采用标准统一化，零部件通用性好。

与国家标准齿式联轴器相比能够传递更大的扭矩，质量相对大幅度减轻，转动惯量小，符合欧洲防爆要求，各种综合性能大大超前。为了更好的传动性能，我们强烈推荐您选用。

鼓型齿式联轴器是一种特别设计的先进齿式联轴器，其外齿制成球面，球面的中心在齿轮的轴线上，齿侧的间隙比一般产品稍大，鼓形齿联轴器可以传递较大的扭矩和允许较大的角位移，性能优异且寿命更加长久。

As the gear type flexible coupling, it can be applied into various general drive sites. Due to the special hook face drum gear design, in the definitive deviation scope, it can effectively avoid the edge stress concentration at tooth meshing, so it has outstanding radial and angular centering capacity. Moreover, it can ensure long service life. ROD series drum gear coupling is one of Rokee’s core technical products. It has compact and reasonable structure, light weight, small hole-position fitting draw ratio, large pressure angle design, accurate centering and excellent speed performance. The bolt design has been standardized in series, the universality of parts is good and its service life far exceeds the one of domestic products.

The gear sleeve at both sides is in the structure of locating ring and uniform parts are used. In addition, the sealing is excellent and easy. Curved-tooth Gear Couplings are applied with larger pressure angle design. The product design is more reasonable and quality is reliable. The gear backlash is reasonable. All ROD series drum type gear couplings are designed in optimization, the structure is more compact and the proportion of hole diameter and length is more coordinated and reliable. Light weight and small rotational inertia. It’s made of high-quality alloy forged steel. It’s very applicable to the sites with anti-explosion requirements. The bolt size of adjacent models is the same and the installation is more convenient. Gear Coupling parts of same model can be exchanged for installation.

GL滚子链联轴器利用共用链条将两个带链齿的半联啮合联接，从而传递扭矩的联轴器，结构简单，装拆方便，安装精度要求低，有一定的补偿能力。

滚子链联轴器是利用公用的链条，同时与两个齿数相同的并列链轮啮合。不同结构型式的滚子链联轴器主要区别是采用不同的链条，常见的有双排滚子链联轴器、单排滚子链联轴器、齿形链联轴器、尼龙链联轴器等。

滚子链条联轴器具有结构简单(四个件组成)、装拆方便、拆卸时不用移动被联接的两轴、尺寸紧凑、质量轻、有一定补偿能力、对安装精度要求不高、工作可靠、寿命较长、成本较低等优点，滚子链联轴器应在良好的润滑并有防护罩的条件下工作。

链条联轴器可用于纺织、农机、起重运输、工程、矿山、轻工、化工等机械的轴系传动。适用于高温、潮湿和多尘工况环境，不适用于高速、有剧烈冲击载荷和传递轴向力的场合，链条联轴器应在良好的润滑并有防护罩的条件下工作。